Products
Transformer Tester
HV Testing Equipment
Series Resonant Equipment
Secondary Circuit Tester
Cable/Lightening Arrester Tester
Earth/Insulation Series
Electrical Measurement & Transformer
Other Electrical Tester
test1
test2
test3
test4
Recommended Products
Contact Us
  • ADD:China Wuhan East Lake hi tech Development Zone (Optics Valley of China)
    TEL:+86 400-6884446
    FAX:+86 400-6884446
    E-mail:whguozi@163.com

GOZ-FY High voltage test equipment

GOZ-FY High voltage test equipment
  • High voltage test equipment
Product Description
     GOZ-FY high voltage pulse resistor divider is mainly used for lightning pulse wave measurement, and the voltage measurement of frequency and impact high voltage, including the lightning full-waveform, 8 / 20us waveform and  other waveforms. As the special lighting pulse divider, it is suitable for grid primary equipment type test (such as zinc oxide arrester lightning steep wave test, e voltage transformer lightning full wav test, high voltage switch lightning full wave test, substation main transformer type test, high voltage GIS test, etc.), substation, high voltage electrical equipment manufacturing factory and high voltage laboratory and other departments. GOZ Technology can meet requirements like China State Grid Electricity Power Research Institute and other relevant authorities inspection, and issue a partial discharge ultrasonic positioning system test report.
    Also called: high voltage pulse divider, resistor divider, lightning high voltage pulse divider, impact voltage pulse divider
Product illustrations
 
Product Features
 The high voltage pulse resistor divider connected oscilloscope by meter lines, which can achieve remote clear reading, safe and convenient. The series equipment has features such as high input impedance, good linearity, using special shielding techniques to reduce the impact of high voltage, and gaining high degree of stability.
1, Oil-type resistor divider adopts Swiss imported high precision resistor, smaller size and better stability.
2, Dry-type resistor divider adopts military using alloy resistance, smaller size and lighter weight.
Product parameters
 1. Voltage degree:AC:50kV -2000kV( peak: 110% rated impact voltage) 
2. Response time:<120ns(Special requirements can be customized) 
3.Impact voltage waveform: 
Lighting impact full-wave(for short: lightning full-wave) main parameters are peak UP, wave front-time T1、half-peak time T2, while standard lighting full wave front-time T1=1.2us, half-peak time T2=50us.  
In order to obtain high accuracy of test data, it is recommended to adopt US Tektronix > 200M oscilloscope, while other technical indicators meet the relevant requirements of high voltage lightning wave measurement.
4.Accuracy:AC:1.0%   
5.Dielectric:imported capacitor oil 
6. Environmental condition: 
   temperature:0~45℃ 
   humidity:<85%RH
7. Resistance value:1kΩ~2MΩ    
8. Partial voltage ratio:1000:1 or customize